Replacing a Apple AirTag battery.
Learn how to easily replace the battery in your Apple AirTag with this step-by-step guide. Follow simple instructions to open the AirTag, replace the CR2032 lithium battery, and reattach the back cover securely. Ensure proper battery alignment and listen for a sound to confirm the device is powered on. Check the battery status using the Find My app. Get tips on compatible batteries and how to avoid issues with bitterant-coated CR2032 batteries. Keep your AirTag functioning efficiently with these essential battery replacement tips.
·
Oct 14, 2024
To replace the battery in your Apple AirTag, follow these simple steps:
1. Open the AirTag:
- Hold the AirTag with the white side facing down and the Apple logo facing up.
- Firmly press down on the silver backplate and rotate it counterclockwise until it stops.
2. Remove the Back Cover:
- Once the cover is loose, lift it off to reveal the battery inside.
3. Replace the Battery:
- Remove the old battery and insert a new CR2032 lithium 3V coin battery with the positive (+) side facing up.
4. Reattach the Back Cover:
- Place the silver cover back on and twist it clockwise until it is secure. You should hear a sound indicating that the battery is recognised.
5. Check Battery Status:
- Open the Find My app on your iPhone to ensure that the low battery notification has disappeared.
Important Notes:
- Battery Compatibility: Some CR2032 batteries with a bitterant coating may not work with AirTags, so check packaging before purchasing.
- Battery Life: The AirTag battery typically lasts about a year, but this can vary based on usage.
By following these steps, you can easily replace your AirTag battery and keep your tracking device functioning properly.
To ensure the new battery in your AirTag is properly seated, follow these steps:
1. Check Alignment: Make sure the positive (+) side of the CR2032 battery is facing up. There should be a corresponding plus sign in the battery compartment to guide you.
2. Press Down Firmly: After placing the battery in, press down firmly to ensure it makes good contact with the prongs inside the AirTag.
3. Reattach the Back Cover: Place the silver back cover on the AirTag and rotate it clockwise until it clicks into place. You should feel resistance as you turn it, indicating that it is securing properly.
4. Listen for a Sound: When the battery is correctly seated and the back cover is reattached, you should hear a sound from the AirTag, indicating that it has powered on and recognised the new battery.
5. Test Functionality: Open the Find My app on your iPhone to check if the AirTag is recognised. If it appears in the app, the battery is properly seated.
If you follow these steps and still experience issues, double-check that you're using a compatible CR2032 battery without a bitterant coating, as some may not work properly with AirTags.
Comments
